Engineering
RSS

Archive

Archive for the ‘Engineering Colleges & Universities’ Category

AMUEE 2015 Mathematics Syllabus

February 26th, 2015 No comments

AMUEE Mathematics Syllabus 2015 – Aligarh Muslim University Entrance Exam Mathematics Syllabus 2015

AMUEE 2015 Mathematics Syllabus AMUEE 2015 Mathematics Syllabus has been Published. All Students who are aspiring for Admission to B.Tech Engineering Programs in Aligarh Muslim University through AMUEE 2015 B.Tech Entrance Test and Searching for AMUEE 2015 Entrance Test Mathematics Syllabus are hereby informed that the AMU admission Authorities has Published AMUEE 2015 Syllabus. Students who are searching for AMUEE 2015 Mathematics Syllabus can check Aligarh Muslim University Entrance Test Mathematics Syllabus.

AMUEE 2015 Entrance Test Syllabus :

Clikc here to check : AMUEE 2015 B.Tech Syllabus

AMUEE 2015 Mathematics Syllabus :

UNIT – I : SETS AND FUNCTIONS

1. SETS

Sets and their representations. Empty set. Finite & Infinite sets. Equal sets. Subsets. Subsets of the set of real numbers especially Intervals (with notations). Power set. Universal set. Venn diagrams. Union and Intersection of sets. Difference of sets. Complement of a set.

2. RELATIONS & FUNCTIONS

Orders pairs, Cartesian product of sets. Number of elements in the Cartesian product of two finite sets. Cartesian product of the reals with itself (upto R x R x R). Definition of relation, pictorial diagrams, domain, codomain and range of a relation.
Function as a special kind of relation from one set to another. Pictorial representation of a function, domain, co-domain and range of a function. Real valued function of the real variable, domain and range of these functions, constant, identity, polynomial, rational modulus, signum and greatest integer functions with their graphs, Sum, difference, product and quotients of functions.

3. TRIGNOMETRIC FUCNTIONS :

Positive and negative angles. Measuring angles in radians and in degrees and conversion from one measure to another. Definition of trigonometric functions with the help of unit circle. Truth of the identity sin2 x + cos2 x = 1 for all x. Signs of trigonometric functions and sketch of their graphs. Expressing sin (x + y) and cos (x+y) in terms of sin x, sin y, cos x and cos y. Deducing the identities like the following :

Identities related to sin 2 x, cos 2 x, tan 2 x, sin 3 x, cos 3 x and tan 3 x. General solution of trigonometric equiations of the type sin q = sin a

UNIT II : ALGEBRA

1. PRINCIPLE OF MATHEMATICAL INDUCTION

Process of the proof by induction, motivating the application of the method by looking at natural numbers as the least inductive subset of real numbers. The principle of mathematical induction and simple applications.

2. COMPLEX NUMBERS AND QUADRATIC EQUATIONS

Need for complex numbers, especially -1 , to be motivated by inability to solve every quadratic equation. Brief description of algebraic properties of complex numbers. Argand plane and polar representation of complex numbers. Statement of Fundamental Theorem of Algebra, Solution of quadratic equations in the complex number system.

3. LINEAR INEQUALITIES :

Linear inequalities, Algebraic solutions of linear inequalities in one variable and their representation on the number line. Graphical solution of linear inequalities in two variables. Solution of system mof linear inequalities in two variables graphically.

4. PERMUTATIONS AND COMBINATIONS

Fundamental principle of counting. Factorial n (n1) Permutations and combinations, derivation of formulae and their connections, simple applications.

5. BINOMIAL THEOREM :

History, statement and proof of the binomial theorem for positive integral indices. Pascals triangle, General and middle term in binomial expansion, simple applications.

6. SEQUENCE AND SERIES

Sequence and Series, Arithmetic progression (A > P), arithmetic mean (A.M.) Geometric progression (G.P., General term of a G.P., sum of n terms of a G.P., geometric mean (G > M), relation between A.M. and G.M. Sum to a terms of the

UNIT III : COORDINATE GEOMETRY :

1. STRAIGHT LINES

Brief recall of 2 D from earlier classes. Slope of a line and angel between two lines. Various forms of eqwuations of a line : parallel to axes, point-slope form, slope intercept form, two point form, intercepts form and normal form. General equation of a line. Distance of a point from a line.

2. CONIC SECTION

Sections of a cone : circle, ellipse, parabola, hyperbola, a point, a straight line and pair of intersecting lines as a degenerated case of conoic section. Standard equations and simple properties of parabola, ellipse and hyperbola. Standard equation of a circle.

3. INTRODUCTION TO THREE DIMENSIONAL GEOMETRY

Coordinate axes and coordinate planes in three dimensions. Coordinatoes of a point. Distance between two points and section formula.

UNIT IV : CALCULUS

1. LIMITS AND DERIVATIVES :

Derivative introduced as rate of change both as that of distance function and geometrically, intuitive idea of limit. Definition of derivative, relate it to slope of tangent of the curve, derivative of sum, difference, product and quotient of functions. Derivatives of polynomial and trigonometric functions.

UNIT V : MATHEMATICAL REASONING

1. MATHEMATICAL REASONING

Mathematically acceptable statements. Connecting words / phrases – consolidating the understanding of “if and only if (necessary and sufficient) condition”, implies”, and/ or”, implied by, “and”, “or”, “three exists” and their use through variety of examples related to real life and mathematics. Validating the statements involving the connecting words – difference between contradiction,
converse and contrapositive.

2. PROBABILITY :

Random experiments : Outcomes, sample, spaces (set representation). Events : occurrence of events, `not, `and and `or events, exhaustive events, mutually exclusive events Axiomatic (set theoretic) probability, connections with the theories of earlier classes. Probability of an event, Probability of `not, `and and `or events.

UNIT – I RELATIONS AND FUNCTIONS

1. Relations and Functions :

Types of relations : reflexive, symmetric, transitive and equivalence relations. One to one and onto functions, composite functions, inverse of a function. Binary operations.

2. Inverse Trigonometric Functions :

Defintion, range, domain, principal value branches, Graphs of inverse trigonometric functions. Elementary properties of inverse trigonometric functions

UNIT II : ALGEBRA

1. Matrices :

Concept, notation, order, equality, types of matrices, zero matrix, transpose of a matrix, symmetric and kew symmetric matrices. Addition, multiplication and scalar multiplication of matrices, simple properties of edition, multiplication and scalar multiplication. Non commutativity of multiplication of matrices and existence of non zero matrices whose product is the zero amt4rix (restrict to square matrices of order 2). Concept of elementary row and column operations. Invertible matrices and
proof of the uniqueness of inverse, if it exists. (Here all matrices will have real entries).

2. Determinants :

Determinant of a square matrix (upto 3 x 3 matrices), properties of determinants, minors, cofactors and applications of determinants in finding the area of a triangle. A joint and inverse of a square matrix. Consistency, inconsistency and number of solutions of system of linear equations by examples, solving system of linear equations in two or three variables (having unique solution) using inverse of a matrix.

UNIT III : CALCULUS

1. Continuity and Differentiability :

Continuity and Differentiability, derivative of composite functions, chain rule, derivative of inverse trigonometric functions, derivative of implicit function. Concept of exponential and logarithmic functions and their derivative. Logarithmic differentiation. Derivative of functions expressed in parametric forms. Second order derivatives. Rolles and Lagranges Mean Value Theorems (without proof) and their geometric interoperations.

2. Applications of Derivatives :

Applications of derivatives : rate of change, increasing / decreasing functions, tangets and normals, approximation, maxima and minima (first derivative test motivated geometrically and second derivative test given as a provable tool).. Simple problems (that illustrate basic principles and understanding of the subject as well as real life situations).

3. Integrals :

Integration as inverse process of differentiation. Integration of a variety of functions by substitution, by partial fractions and by parts, only simple integrals of the type :

To be evaluated.

Define integrals as a limit of sum, Fundamental Theorem of calculus (without proof). Basic properties of definite integrals and evaluation of definite integrals.

4. Applications of the Integrals :

Applications in findings the area under simple curves, especially lines, areas of circles / parabolas / ellipse (in standard form only), area between the two above said curves (the region should be clearly identifiable).

5. Differential Equations :

Definition, order and degree, general and particular solutions of a differential equation. Formation of differential equation whose general solution is given. Solution of differential equations by method of separation of variables, homogeneous differential equations of first order and first degree. Solutions of linear differential equations of the type :

UNIT IV : VECTORS AND THREE DIMENSIONAL GEOMETRY :

1. Vectors :

Vectors and scales, magnitude and direction of a vector. Direction cosines / ratios of vectors. Types of vectors (equal, unit, zero, parallel and collinear vectors), position vector of a point, negative of a vector, components of a vector, addition of vectors, multiplication of a vector by a scalar, position vector of a point dividing a line segment in a given ratio Scalar (dot) product of vectors, projection of a vector on a line. Vector (cross) product of vectors.

2. Three – dimensional Geometry :

Direction cosines / ratios of a line joining two points. Cartesian and vector equation of a line, coplanar and skew lines, shortest distance between two lines. Cartesian and vector equation of a plane. Angle between (1) two lines, (ii) two planes, (iii) a line and plane. Distance of a point from a plane.

UNIT V : LINEAR PROGRAMMING

1. Linear programming

Introduction, definition of related terminology such as constraints, objective function, optimization, different types of linear programming (LP) problems, mathematical formulation of LP, problems, graphical method of solution for problems in two variables, feasible and infeasible regions, feasible and infeasible solutions, optional feasible solutions (upto three non trivial constraints).

UNIT VI : PROBABILITY

1. Probability :

Multiplication theorem on probability, Conditional probability, independent events, total probability, Bayes theorem, Random Variable and its probability distribution, mean and variance of haphazard variable. Repeated independent (Bernoulli) trials
and Binomial distribution.

Click here to check : AMUEE 2015 Mathematics Syllabus

For More Updates on : AMUEE 2015 Application Forms, Entrance Test and Counseling

AMUEE 2015 Chemistry Syllabus

February 26th, 2015 No comments

AMUEE Chemistry Syllabus 2015 – Aligarh Muslim University Entrance Exam Chemistry Syllabus 2015

AMUEE 2015 Chemistry Syllabus AMUEE 2015 Chemistry Syllabus has been Published. All Students who are aspiring for Admission to B.Tech Engineering Programs in Aligarh Muslim University through AMUEE 2015 B.Tech Entrance Test and Searching for AMUEE 2015 Entrance Test Chemistry Syllabus are hereby informed that the AMU admission Authorities has Published AMUEE 2015 Syllabus. Students who are searching for AMUEE 2015 Chemistry Syllabus can check Aligarh Muslim University Entrance Test Chemistry Syllabus.

AMUEE 2015 Entrance Test Syllabus :

Clikc here to check : AMUEE 2015 B.Tech Syllabus

AMUEE 2015 Chemistry Syllabus :

1. Some Basic concepts of Chemistry, Structure of Atom, Classification of elements and periodicity in properties, Chemical bonding and molecular structure.

2. States of matter : Gases and liquids, Solid State, Solutions.

3. Thermodynamics.

4. Equilibrium, Redox reactions, Electrochemistry.

5. Chemical Kinetics, Surface Chemistry.

6. Hydrogen, General principles and process of isolation of elements, Studies of s & p-d and f – block elements, Coordination compounds.

7. Organic Chemistry : Some basic principles and Techniques, Hydrocarbons. Haloalkanes and Haloarenes, alcohols, phenols and Ethers.

8. Aldehydes, Ketones and Carboxylic acids.

9. Organic compounds containing nitrogen.

10. Biomolecules, Polymers, Chemistry in everyday life.

11. Environmental Chemistry.

Note : Prescribed Book : Text Books of Chemistry Class XI and Class XII NCERT Publication, latest edition

Click here to check : AMUEE 2015 Chemistry Syllabus

For More Updates on : AMUEE 2015 Application Forms, Entrance Test and Counseling

AMUEE 2015 Physics Syllabus

February 26th, 2015 No comments

AMUEE Physics Syllabus 2015 – Aligarh Muslim University Entrance Exam Physics Syllabus 2015

AMUEE 2015 Syllabus AMUEE 2015 Physics Syllabus has been Published. All Students who are aspiring for Admission to B.Tech Engineering Programs in Aligarh Muslim University through AMUEE 2015 B.Tech Entrance Test and Searching for AMUEE 2015 Entrance Test Physics Syllabus are hereby informed that the AMU admission Authorities has Published AMUEE 2015 Syllabus. Students who are searching for AMUEE 2015 Physics Syllabus can check Aligarh Muslim University Entrance Test Physics Syllabus.

AMUEE 2015 Entrance Test Syllabus :

Clikc here to check : AMUEE 2015 B.Tech Syllabus

AMUEE 2015 Physics Syllabus :

Physical World and Measurement

Physics-scope and excitement, nature of physical laws; Physics, technology and society. Need for measurement: Units of measurement; systems of units; SI units, fundamental and derived units. Length, mass and time measurements; accuracy and
precision of measuring instruments, errors in measurement; significant figures. Dimensions of physical quantities, dimensional analysis and its applications.

Kinematics

Frame of reference. Motion in a straight line: Position-time graph, speed and velocity. Uniform and non-uniform motion, average speed and instantaneous velocity. Uniformly accelerated motion, velocity-time, position-time graphs, relations for uniformly accelerated motion (graphical treatment). Elementary concepts of differentiation and integration for describing motion. Scalar and vector quantities: Position and displacement vectors, general vectors and notation, equality of vectors, multiplication of vectors by a real number; addition and subtraction of vectors. Relative velocity. Unit vector; Resolution of a vector in a plane-rectangular components. Motion in a plane. Cases of uniform velocity and uniform acceleration projectile motion. Uniform circular motion.

Laws of Motion

Intuitive concepts of force. Inertia, Newtons first law of motion; momentum and Newtons second law of motion; impulse; Newtons third law of motion. Law of conservation of linear momentum and its applications. Equilibrium of concurrent
forces. Static and kinetic friction, laws of friction, rolling friction. Dynamics of uniform circular motion: Centripetal force, examples of circular motion (vehicle on level circular road, vehicle on banked road).

Work, Energy and Power

Scalar product of vectors. Work done by a constant force and a variable force; kinetic energy, work-energy theorem, power. Notion of potential energy, potential energy of a spring, conservative forces: conservation of mechanical energy (kinetic
and potential energies); non-conservative forces: elastic and inelastic collisions in one and two dimensions.

Motion of System of Particles and Rigid Body

Centre of mass of a two-particle system, momentum conversation and centre of mass motion. Centre of mass of a rigid body; centre of mass of uniform rod. Vector product of vectors; moment of a force, torque, angular momentum, conservation of angular momentum with some examples. Equilibrium of rigid bodies, rigid body rotation and equations of rotational motion. Comparison of linear and rotational motions; moment of inertia, radius of gyration. Values of moments of inertia for simple geometrical objects (no derivation). Statement of parallel and perpendicular axes theorems and their applications.

Gravitation

Keplars laws of planetary motion. The universal law of gravitation. Acceleration due to gravity and its variation with altitude and depth. Gravitational potential energy; gravitational potential. Escape velocity. Orbital velocity of a satellite. Geo-stationary
satellites.

Properties of Bulk Matter

Elastic behaviour, Stress-strain relationship, Hookes law, Youngs modulus, bulk modulus, shear, modulus of rigidity. Pressure due to a fluid column; Pascals law and its applications (hydraulic lift and hydraulic brakes). Effect of gravity on fluid pressure. Viscosity, Stokes law, terminal velocity, Reynolds number, streamline and turbulent flow. Bernoullis theorem and its applications. Surface energy and surface tension, angle of contact, application of surface tension ideas to drops, bubbles and capillary rise. Heat, temperature, thermal expansion; specific heat-calorimetry; change of state-latent heat. Heat transfer-conduction, convection and radiation, thermal conductivity, Newtons law of cooling.

Thermodynamics

Thermal equilibrium and definition of temperature (zeroth law of thermodynamics). Heat, work and internal energy. First law of thermodynamics. Second law of thermodynamics: reversible and irreversible processes. Heat engines and refrigerators.

Behaviour of Perfect Gas and Kinetic Theory

Equation of state of perfect gas, work done on compressing a gas. Kinetic theory of gases-assumptions, concept of pressure. Kinetic energy and temperature; rms speed of gas molecules; degrees of freedom, law of equipartition of energy (statement only) and application to specific heats of gases; concept of mean free path, Avogadros number.

Oscillations and Waves

Periodic motion-period, frequency, displacement as a function of time. Periodic functions. Simple harmonic motion (S.H.M) and its equation; oscillations of a springrestoring force and force constant; energy in S.H.M.-kinetic and potential energies; simple pendulum-derivation of expression for its time period; free, forced and damped oscillations (qualitative ideas only), resonance. Wave motion. Longitudinal and transverse waves, speed of wave motion. reflection of waves, standing waves in strings and organ pipes, fundamental mode and harmonics, Beats, Doppler effect.

Electrostatics

Electric charges, Conservation of charge, Coulombs low-force between two point charges forces between multiple charges, superposition principle and continuous charge distribution.

Electric field, electric field due to a point charge, electric field lines; electric dipole electric field due to a dipole torque on a dipole in uniform electric field.

Electric flux, statement of gausss theorem and its applications to find field due to infinitely long straight wire uniformly charges infinite plane sheet and uniformly charged tin spherical shell (field inside and outside).

Electric potential, potential difference, electric potential due to a point charge, a dipole and system of charge; equipotential surfaces, electrical potential energy of a system of two point charges and of electric dipole in an electrostatic field.

Conductors and insulators, free charges and bound charges inside a conductor. Dielectrics and electric polarization, capacitors and capacitance, combination of capacitors in series and in parallel, capacitance of a parallel plate capacitor with and without dielectric medium between the plates, energy stored in a capacitor. Van de Graaff generator.

Current Electricity

Electric current flow of electric chargers in a metallic conductor drift velocity, mobility and their relation with electric current; Ohms electrical resistance, V-I characteristics (linear and non-linear), electrical energy and power, electrical resistivity and
conductivity. Carbon resistors colour code for carbon resistors; series and parallel combinations of resistors; temperature dependence of resistance.

Internal resistance of a cell, potential difference and emf of a cell combination of cells in series and in parallel. Kirchhoffs laws and simple applications. Wheatstone bridge and metre bridge.

Potentiometer – principle and its applications to measure potential difference and for comparing emf of two cells; measurement of internal resistance of a cell.

Magnetic Effects of Current and Magnetism

Concept of magnetic field, Oersteds experiment. Biot-Savart law and its application to current carrying circular loop. Amperes law and its applications to infinitely long straight wire, straight and toroidal solenoids.

Force on a moving charge in uniform magnetic and electric fields. Cyclotron. Force on a current – carrying conductor in a uniform magnetic field. Force between two parallel current – carrying conductors – definition of ampere. Torque experienced by a current loop in uniform magnetic field; moving coil galvanometer – its current sensitivity and conversion to ammeter and voltmeter. Current loop as a magnetic dipole and its magnetic dipole moment. Magnetic dipole, moment of a revolving electron, magnetic field intensity due to a magnetic dipole (bar magnet) along its axis and perpendicular to its axis. Torque on magnetic dipole (bar magnet) in a uniform magnetic field; bar magnet as an equivalent solenoid magnetic field line; Earths magnetic field and magnetic elements para – dia – and ferro – magnetic Displacement relation for a progressive wave. Principle of superposition of waves substances, with examples. Electromagnets and factors of affecting their strengths.
Permanent magnets.

Electromagnetic Induction and Alternating Currents

Electromagnetic Induction; Faradays law. Induced emf and current; Lenzs law, Eddy current self and mutual inductance.
Need for displacement current. Alternating currents, peak and rms value of alternating; current/voltage, reactance and impedance;

LC oscillations (qualitative treatment only), LCR series circuit, resonance; power in ac circuits wattles current.
AC generator and transformer.

Electromagnetic Waves

Displacement current, Electromagnetic wave and their characteristics (qualitative ideas only) Transverse nature of electromagnetic waves.

Electromagnetic spectrum (radio waves, microwaves, infrared, visible, ultraviolet, xrays, gamma rays) including elementary facts about their uses.

Optics

Reflection of light spherical mirrors, mirror formula refraction of light, total internal reflection and its applications, optical fibres refraction at spherical surfaces, lenses thin lens formula lens makers Formula. Magnification power of a lens, combination
of thin lenses in contract. Refraction and dispersion of light through a prism.

Scattering of light – blue colour of the sky and reddish appearance of the sun at sunrise and sunset.

Optical instruments: Human eye, image formation and accommodation, correct of eye defects (myopia, hypermetropia, presbyopia and astigmatism) using lenses. Microscopes and astronomical Telescopes (reflecting and refraction) and their
magnifying powers.

Waves optics: Wave front and Huygens principle reflection and refraction of plane wave at a plane surface using wave fronts. Proof of laws of reflection and refraction using Huygens principle. Interference, Youngs double slit experiment and expression for fringe width coherent sources and sustained interference of light. Diffraction due to a single slit, width of central maximum. Resolving power of microscopes and astronomical telescopes Polarization, plane polarized light; Brewsters law. Uses of plane polarized light and polaroids.

Dual Nature of Matter and Radiation

Dual nature of Radiation Photoelectric, Hertz and Lenards observations; Einsteins Photoelectric equation – particle nature of light. Matter waves-wave nature of particles, de Broglie relation. Davission – Germer experiment

Atoms & Nuclei :

Alpha-particle scattering experiment, Rutherfords model of atom; Bohr model, energy levels hydrogen spectrum. Composition and size of nucleus, atomic masses, isotopes, isobars; isotones. Radioactivity – alpha, beta and gamma particles/rays and their properties; radioactive decay law Mass-energy relation, mass defect; binding energy per nucleon and its variation with mass number; nuclear fission, nuclear reactor, nuclear fusion.

Electronic Devices :

Semiconductors; semiconductor diode – I – V. characteristics in forward and reverse bias, diode as a rectifier; I – V characteristics of LED, photodiode, solar cell and Zener diode: Zener diode as a voltage regulator. Junction transistor, transistor action characteristics of a transistor; transistor as an amplifier (common emitter configuration) and oscillator. Logic gates (OR, AND, NOT, NAND and NOR). Transistor as a switch.

Communication Systems :

Elements of a communication system (block diagram only); bandwidth of signals (speech, TV and digital data); bandwidth of transmission medium. Propagation of electromagnetic waves in the atmosphere, sky and space wave propagation. Need
for modulation. Production and detection of an amplitude-modulate wave.

lick here to check : AMUEE 2015 Physics Syllabus

For More Updates on : AMUEE 2015 Application Forms, Entrance Test and Counseling

AMUEE 2015 Syllabus

February 26th, 2015 No comments

AMUEE Entrance Test Syllabus 2015 – Aligarh Muslim University Entrance Exam Syllabus 2015

AMUEE 2015 Syllabus All Students who are aspiring for Admission to B.Tech Engineering Programs in Aligarh Muslim University and Other Under Graduate and Post Graduate Programs in Aligarh Muslim University through AMUEE 2015 Entrance Test and Searching for AMUEE 2015 Entrance Test Syllabus are hereby informed that the AMU admission Authorities has Published AMUEE 2015 Syllabus. Interested Students can check Aligarh Muslim University Entrance Test Syllabus.

AMUEE 2015 Syllabus for all Programs :

AMUEE 2015 Syllabus for B.Tech Programs :

AMUEE 2015 Syllabus for B.Tech Entrance Test includes AMUEE 2015 Physics Syllabus, AMUEE 2015 Chemistry Syllabus and AMUEE 2015 Mathematics Syllabus.

AMUEE 2015 Syllabus for Physics   BITSAT 2015 Online Test Center Allotment

AMUEE 2015 Syllabus for Chemistry  BITSAT 2015 Online Test Center Allotment

AMUEE 2015 Syllabus for Mathematics  BITSAT 2015 Online Test Center Allotment

AMUEE 2015 Syllabus Other than B.Tech Programs :

AMUEE 2015 Syllabus includes AMUEE 2015 Syllabus for Arts, AMUEE 2015 Syllabus for Commerce , AMUEE 2015 Syllabus for Law, AMUEE 2015 Syllabus for Medical Programs and AMUEE 2015 Syllabus for Other Programs.

Click here to check : AMUEE 2015 Syllabus for All Programs  BITSAT 2015 Online Test Center Allotment

For More Updates on : AMUEE 2015 Application Forms, Entrance Test and Counseling 

Vignan University 2015 Placements

February 26th, 2015 No comments

Vignan University Placements Statistics and Salary Details 2014 – 2015

Vignan University 2015 Placements VIGNAN University Campus Placements for the Academic year 2014 – 2015 has been Published. All Students who are aspiring for Admission to B.Tech Engineering Programs in Vignan University and Searching for Vignan University Campus Placements 2015 are hereby informed that the www.myengg.com has Published the Complete details regarding Vignan University 2015 Placements Statistics and Salary details.Interested Students can check Vigna University 2015 Placements StatisticsVignan University 2015 Salary Details.

Given below are the Vignan University 2015 Complete Placements Details Interested Students can check Vignan University 2015 Placements Key Statistics, Vignan University 2015 Placements Statistics & Salary Details Company Wise and Vignan University 2015 Placements Statistics & Salary Details Company wise.

Vignan University 2015 Placements Statistics and Salary Details :

Vignan University 2015 Placements Key Statistics :

Total Number of Companies Visited Vignan University 2015 Campus Placements : 24

Total Number of offered made in Vignan University 2015 Campus Placements : 249

Company offered Highest Number of offers in Vignan University 2015 Placements : TCS (159)

Companies offered 0 Placements in Vignan University 2015 Placements are : Indian Navy, Veda IIT, Path Partner and CYIENT ltd

Vignan University 2015 Placements Salary Ranges :

Highest Salary Package offered in Vignan University 2015 Campus Placements : 4.5 – 5 Lakhs Per Annum

Average Salary Package offered in Vignan University 2015 Campus Placements : 1.32 Lakhs Per Annum

Lowest Salary Package offered in Vignan University 2015 Campus Placements : 2.88 Lakhs Per Annum

Vignan University 2015 Placements Statistics Branch Wise :

Vignan University 2015 Branch wise Placements

Branch Name

Code

Offers Made

Electronics and Communication Engineering

ECE

110

Electrical and Electronics Engineering

EEE

26

Computer Science Engineering

CSE

60

Information Technology

IT

5

Mechanical Engineering

MECH

18

MCT

2

Civil Engineering

CIVIL

0

Bio Technology

BT

2

Chemical & Textile Engineering

CH & TE

4

Master of Computer Applications

MCA

0

Master of Business Administration

MBA

19

M.Tech in ECE

MT ECE

1

M.Tech in EEE

MT EEE

2

M.Tech in CSE

MT CSE

0

Vignan University 2015 Placements Statistics Company Wise :

Vignan University 2015 Campus Placements Statistics and Salary Details

S.No

Company Name

Salary in Rs Lakhs / Annum

Offers Made

1

TCS

3.2

159

2

Med Plus

1.32

6

3

Indian Navy

4.5

0

4

Veda IIT

2.5

0

5

Open Text

4.5

2

6

Fony Techonolgies

3.6

9

7

Amaraja

3.2

13

8

Satayam

2.1

2

9

EC -Council

2.5

6

10

Efftronics

3.6

2

11

NTT Data

3.5

3

12

Ways 2 Capital

2.88

1

13

Shrey Electric

2.88

4

14

The Associate

1.44

1

15

Suzalon

4.5-5

1

16

Polaris

3.5

8

17

Ocean India

1.8

3

18

Osmosys

3

3

19

IBM

2.5

1

20

Mphasis

3.15

6

21

CMC ltd

2.4

16

22

Path Partner

4.22

0

23

Apps associates

3.5

3

24

CYIENT ltd

2.7

0

Total Offers Made in Vignan University 2015 Campus Placements

249

Vignan University Past Placements Statistics and Salary Details : 

VIGNAN University Placements Statistics and Salary details 2015  Vignan University 2015 Placements

VIGNAN University Placements Statistics and Salary details 2014  Vignan University 2015 Placements

VIGNAN University Placements Statistics and Salary details 2013  Vignan University 2015 Placements

VIGNAN University Placements Statistics and Salary details 2012   Vignan University 2015 Placements  

VIGNAN University Placements Statistics and Salary details 2010-2011  Vignan University 2015 Placements  

Form More Updates on Vignan University Admissions and Placements 

GCET 2015 Application Form (Part – A)

February 26th, 2015 No comments

Instructions to Fill GCET 2015 Application Forms – Step by Step Procedure for Filling GCET 2015 Application Forms

GCET 2015 Application Form (Part - A) All Students who are aspiring for Admission to B.Tech Engineering Programs in Public and Private Engineering Colleges through GCET 2015 Entrance Test are hereby informed that the Directorate of Technical Education Goa State has enabled the Students to fill the GCET 2015 Application Form. there are two steps for Completing the GCET 2015 Application Form they are GCET 2015 Application Form – Pre GCET 2015 (Part A) and GCET 2015 Application Form – Post GCET 2015 (Part B).

Students who are aspiring for Admission to B.Tech Engineering Programs has to Fill the Application Forms before and after Entrance Exam in order to appear for Counseling. Students who aspires to apply for GCET 2015 Entrance Test has to Fill GCET 2015 Application Form Part A. Given below are the Guidelines to fill GCET 2015 Application form.

GCET 2015 Application Form – Part A :

Print / Download GCET 2015 Application Form Part A

Step by Step Procedure for Filling GCET 2015 Application Form :

  1. PHOTOGRAPH affixed on the GCET 2015 form A should be a recent one i.e. taken not earlier than 3 months prior to the date of application. 2 additional identical passport size photographs are to be enclosed with this form.
  2. Write Applicants NAME in CAPITAL LETTERS and DATE OF BIRTH as it appears in your Secondary School Certificate Examination (SSCE) certificate
  3. ADDRESS must be complete, including the postal code.
  4. TELEPHONE NUMBER must be given with area code in brackets.
  5. SUBJECT CODE: Encircle codes of subjects you intend to attempt (PY – Physics,  MA – Mathematics,CH – Chemistry and BY – Biology )
  6. CENTRE CODE : Choose your centre by writing the centre code and name . LIST OF CENTERS
  7. Self attested photo copies of the following CERTIFICATES to be enclosed:
  • SSCE Passing Certificate.
  • Std XII passing certificate or HSSC Examination Hall Ticket.

GCET 2015 Application Form Submission :

This Form should be accompanied by Demand draft should be drawn in favour of Director of Technical Education for Rs. 1500/- payable at Panaji, in Scheduled Bank , or any other approved form of remittance, as may be duly notified. The Filled-in GCET 2015 Application Form Part A should be Send along with the Necessary Documents on or before last date to the address mentioned below.

ACTIVITY

DATE

GCET APPLICATION FORM RECEIVING CENTRES

GCET 2015 Application Form Part A Submission and Collecting of GCET 2015 Admit Cards

23 rd March 2015
to
1st April 2015

a) Ravindra Bhavan, Margao (For South Goa
District GCET Exam Centers, including Ponda).
b) Directorate of Technical Education, Porvorim
(For North Goa District GCET Exam Centers).

For More Updates on : GCET 2015 Application Form Part A and Entrance Test

VITEEE 2015 Online Application Date Extended to 15th March

February 26th, 2015 No comments

VIT EEE 2015 Application Filling Dates Extended – Last date to Apply for VITEEE 2015 Entrance Test Extended to 15.3.2015

VITEEE 2015 Online Application Date Extended to 15th March Students whoa are aspiring for Admission to B.Tech Engineering Programs in Vellore Institute of Technology VIT Vellore Campus and VIT Chennai Campus has to apply and appear for VITEEE 2015 Entrance Test. Students who aspires to Fill VITEEE 2015 Online Application Form are hereby informed that the VITEEE 2015 Online Application Process Ends on 27th Feb 2015. VIT Authorities are receiving several Requests from students and Parents to Extended the VITEEE 2015 Online Application Dates. Considering all Requests VIT Authorities has Extended VITEEE 2015 Application Issue / Receipt date to 15.3.2015.

VITEEE 2015 Online Application Form Starts on December 1st 2015. Earlier the Last Date for Issue / Receipt of VITEEE 2015 Application Forms is 27.2.2015. But as per the New Notice Last Date for Issue / receipt of VITEEE 2015 Application Form is extended to 15.3.2015. So Interested Students can utilize this Chance and Fill VITEEE 2015 Application Form.

VITEEE 2015 Application Forms :

Click here to : Fill VITEEE 2015 Application Forms

Click here to check : VITEEE 2015 Application Status

VITEEE 2015 Online Application Date Extended Notification :

For More Updates on : VITEEE 2015 Application Forms, Admit Cards and Results

CUSAT 2015 Fee Payment Date Extended

February 26th, 2015 No comments

CUSAT 2015 Application Fee Payment Date Extended- CUSAT 2015 Registration Fee Payment Date Extended

CUSAT 2015 Fee Payment Date Extended Students who had registered for CUSAT 2015 Entrance Test, Filled CUSAT 2015 Online Application Form without paying fee are hereby informed that the Cochin University of Science and Technology authorities has Extended the Date for Paying CUSAT 2015 Application Fee and enabled the Students to Pay the CUSAT 2015 Entrance Exam Fees in demand Draft Mode. 

As Per the CUSAT 2015 Press release on 20th Feb 2015, Students who made CUSAT 2015 Online Registration before the notified date i.e. 3.2.2015 and Unable to pay the CUSAT 2015 Examination Fee can pay the fee using Demand Draft method the notified amount should be paid as demand Draft Drawn in favour of The Registrar, CUSAT Payable at Ernakulam from any Nationalized bank.

The Demand draft for the required fee along with the fee chalan downloaded from the website should reach the office of the Director, IRAA, Cochin University of Science and Technology, Kochi 682022 on or before 28-02-2015. Candidates are advised to write Applicant Name and CUSAT 2015 Registration Number on the back side of the demand draft.

Source : CUSAT 2015 Fee Payment Date Extended

For More Updates regarding : CUSAT 2015 Admit Cards, Entrance Test and Admissions

TS EAMCET 2015 Notification

February 25th, 2015 No comments

TS EAMCET 2015 Entrance Test Notification

TS EAMCET 2015 Notification Telangana State Engineering Agriculture Medical Common Entrance Test 2015 Admission Notification has been issued by Telangana State Council for Higher Education TSCHE on 25th February 2015. So All Students who are aspiring for Admission to B.Tech Engineering, MBBS Medical Programs and Agriculture Programs in Public and Private Engineering Colleges in Telangana State can check TS EAMCET 2015 Admissions Notification

For this year Telangana State Government has decided to conduct Separate EAMCET for Students of Telangana. Sources Say that the JNTU Hyderabad will organize TS EAMCET 2015 Entrance Test for entry into the professional courses offered for the academic year 2015 -2016 in the State of Telangana.

All Students who are Eligible and wish to Apply for EAMCET 2015 Entrance Test must submit their TS EAMCET 2015 Online Applications from 28.02·2015 to 09.04.2015 (without late fee). Detailed information regarding TS EAMCET 2015 Syllabus. List of courses, Procedure for Online Application with / without late fee etc., is given in the Detailed TS EAMCET 2015 Notification & TS EAMCET 2015 Instruction Booklet will be displayed in the website www.tseamcet.in.

Stream

Date

Time

Registration Fee

Engineering (E)

14-5-2015

10 AM to 1 PM

Rs 250 /-

Agriculture & Medical (AM)

14-5-2015

2:30 PM to 5:30 PM

Rs 250 /-

Both Engineering (E) and Agriculture & Medical (AM)

14-5-2015

as Mentioned above

Rs 500 /-

 The EAMCET 2015 Registration fee may be paid at TS Online / AP Online / Mee Seva / e-Seva centers in Telangana State or A,P./ through Payment Gateway (Credit card / Debit card). 

TS EAMCET 2015 Important Dates :

 Notification Date 25-02-2015
Commencement of Submission of Online Application form 28-02-2015
Last date for Submission of Online Application form without late fee 09-04-2015
Correction of Online Application data already submitted by the candidate 15-04-2015
to
20-04-2015
Last date for Submission of Online Application with late fee of Rs. 500/- 15-04-2015
Last date for Submission of Online Application with late fee of Rs. 1,000/- 22-04-2015
Last date for Submission  of Online Application with late fee of Rs. 5,000/- 05-05-2015
Last date for Submission of Online Application with late fee of Rs 10,000/- 12-05-2015
Downloading of Hall Tickets from the website www.tseamcet.in 08-05-2015
to
12-05-2015
Date of  Examination 14-05-2015

(a) Engineering (E)

10.00 A.M. to 1.00 P.M.

(b) Agriculture and Medical (AM)

2.30 P.M. to 5.30 P.M.

Source : Notification & Important Dates

For More updates on : TCHE and TS EAMCET 2015 Entrance Test and Counselling

AMUEE 2015 Test Centers

February 25th, 2015 No comments

AMUEE 2015 Exam Centers – Aligarh Muslim University Entrance Test Centers 2015

AMUEE 2015 Test Centers Aligarh Muslim University Entrance Exam Centers 2015 has been Published. All Students who are aspiring for Admission to B.Tech Engineering , Architecture, Medical, Dental and other Under Graduate and Post Graduate Programs in Aligarh Muslim University through AMUEE 2015 Entrance Test are hereby informed that the AMU Authorities has published List of AMUEE 2015 Test Centers based on the Course Applying for. Interested Students who are searching for a AMUEE 2015 Test Centers can check AMUEE 2015 Test Centers Course Wise.

Students must note that the AMUEE 2015 Entrance Test for a particular Courses will be held in AMUEE 2015 Test Center Published in the Corresponding Rows only. Students are required to indicate in the column provided in AMUEE 2015 Application Form their preference of AMUEE 2015 Admission Test Centers.

AMUEE 2015 Entrance Test Centers : 

Aligarh Muslim University Entrance Exam Centers 2015

S.No

Exams

Test Centers

1

B.Tech.
(Candidates opting for B. Arch. shall
be allotted only Aligarh as Test Centre)

Aligarh (U.P.)    Lucknow (U.P.)
Srinagar (J. & K.) Kolkata (W.B.)

2

M.B.B.S.
B.D.S.

Aligarh (U.P.)  Allahabad (U.P.)
Bareilly (U.P.)   Lucknow (U.P.)
Bhopal (M.P.)      Kolkata (W.B.)
Srinagar (J. & K.)  Kozhikode (Kerala)
Hyderabad (A.P.) Guwahati (Assam)
Patna (Bihar)

3

Diploma in Engineering
Senior Secondary School Certificate

Aligarh (U.P.)    Lucknow (U.P.)
Meerut (U.P.)        Patna (Bihar)
Srinagar (J. & K.)

4

B.A.LL.B

Aligarh (U.P.)      Kolkata (W.B.)
Kozhikode (Kerala)

5

MBA / MBA(IB) / PGDIBF

Aligarh (U.P.)      Kolkata (W.B.)
Kozhikode (Kerala) Patna (Bihar)

6

B.A.(Hons)
B.Sc.(Hons)
B.Com(Hons)

Aligarh (U.P.)    Lucknow (U.P.)
Kolkata (W.B.)  Srinagar (J. & K.)

7

B. Ed.

Aligarh (U.P.)      Kolkata (W.B) Kozhikode (Kerala) Patna (Bihar)

8

For All Other Courses

Aligarh (U.P.)

Important Points regarding AMUEE 2015 Test Centers :

  1. The University reserves the right to change / cancel any AMUEE 2015 Test Centre without assigning any reason.
  2. The University reserves the right to allot any AMUEE 2015 Test Centre to a candidate irrespective of the preference indicated by him/her on the Application Form without assigning any reason.
  3. Complete addresses of the AMUEE 2015 Admission Test Centres in various cities will be available on our website well before the commencement of the AMUEE 2015 Admission Tests.
  4. For courses where selection is through Departmental Test, the AMUEE 2015 Test Centre will be only in Aligarh

Source : Aligarh Muslim University Entrance Exam Centers 2015

For More Updates on : AMUEE 2015 Application Forms, Entrance Test and Counseling